error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

[Costantina Caruso]

good morning

I have an msa1000 san g2 kit + upgrade g2
with 4 HP qle220 fc hba

my server is a rhel 5

I use the installation script in hp cd driver
but I obtain this error

error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2

the entire log is


Preparing... ########################################### [100%]
Logfile is /var/log/hp_qla2x00_install.log
Getting list of QLA FC HBAs
No QLA FC HBAs found on system; proceeding with installation
1:hp_qla2x00src ########################################### [100%]
No driver loaded, using failover mode
Writing new /etc/hp_qla2x00.conf...done
Copying /opt/hp/src/hp_qla2x00src/libqlsdm-ia32.so to /usr/lib/libqlsdm.so
Copying /opt/hp/src/hp_qla2x00src/libqlsdm-x86_64.so to /usr/lib64/libqlsdm-x86_64.so
Adding line for libqlsdm.so to /etc/hba.conf
Adding line for libqlsdm-x86_64.so to /etc/hba.conf
Kernel modules directory: /lib/modules/2.6.18-92.1.6.el5xen/kernel/drivers/scsi/qla2xxx
Kernel build directory: /lib/modules/2.6.18-92.1.6.el5xen/build

Enabling failover in /lib/modules/2.6.18-92.1.6.el5xen/build/.config
error: %post(hp_qla2x00src-8.01.06.01-12.noarch) scriptlet failed, signal 2
---------------------------------------------




any idea?
best regards

[Bharath_Pingali]

Hello Costantina,

My understanding is that you need to have kernel source installed.

Can you check if "2.6.18-92.1.6.el5xen" Soruce rpm is installed?


Also, are you using XEN?

-Thank You
Bharath

[skt_skt]

similar location

lrwxrwxrwx 1 root root 33 Jul 6 01:44 /lib/modules/2.4.9-e.72enterprise/build -> ../../../usr/src/linux-2.4.9-e.72

[Costantina Caruso]

I have not solved the problem yet
but I have discovered that
the HBA driver supplied is for A7523A FC Adapter which is guaranteed for 32-bit Linux
while we have a 64-bit SO


I wait for a 64-bit driver for this adapter

best regards