Error with ACU array

[Christian Salinas Salaz]

Hola

Tengo un servidor RX4640 (Itanium) con RH AS 2.1.

Controladora de arreglo Smart Array 6402 interna (RAID1). OK

PCI-X dual channel conectada a un MSA1000.
Dos RAID5. OK.

Cuando levanto el ACU ARRAY en linux, este carga, pero no muestra ninguna de las controladores de arreglo de discos.

Help

CSS

[Steven E. Protter]

Here is an English translation of the post.

Hello I have a servant RX4640 (Itanium) with RH AS 2.1. Controller of adjustment Smart Array 6402 commits (RAID1). OK dual Pci-x channel connected to a MSA1000. Two RAID5. OK. When I raise the ACU ARRAY in linux, this load, but does not show any of the controllers of disc adjustment.

I don't have any more input on the problem, not being well versed in this aspect of Linux. Properly configured the disk should be auto detected.

SEP