HPE Community
Operating System - Linux
1838212 Members
4960 Online
110125 Solutions
New Discussion

Getting errors on the linux enterprise 2.1 installed on compaq DL380 connected to EVA3000

 
Ketan Gautam Sharma
New Member

‎05-06-2005 06:19 PM

‎05-06-2005 06:19 PM

Getting errors on the linux enterprise 2.1 installed on compaq DL380 connected to EVA3000

Below attached are error messages received from a compaq DL380 servers,which have the linux enterprise 2.1 installed on them and are connected to the EVA 3000.
0 Kudos
Reply
1 REPLY 1
SAKET_5
Honored Contributor

‎05-08-2005 12:08 AM

‎05-08-2005 12:08 AM

Re: Getting errors on the linux enterprise 2.1 installed on compaq DL380 connected to EVA3000

Hi Ketan,

Could you provide more information on your SAN topology. From the error messages, it seems that your device has been configured for an FC-AL (Fibre Channel Arbitrated Loop configuration) and hence multiple LIPs (Loop Initialisation Primitives)..it also finds one of your EVA 3000s as one of the loop nodes.

I wonder if this is indeed your SAN setup, i.e. are you not using point-to-point or switched fabric topology?

lets get more info on the plate and we can take it further...

cheers.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.