How I install RH9 in a RAID 1

[Daniel Caçador]

Hello!
I have a HP proliant ml 110, 2 HD SATA in a RAID1(MIRROR?).
How I install RH9 if the instalation don´t find the disk?

Thank´s!

[sandeep_raman]

Hello Daniel,

See if this works,
ftp://ftp.compaq.com/pub/products/servers/supportsoftware/linux/ml110rh904portSATA1.1.30-56.tgz
Readme file in the tarball.

SRH

[Daniel Caçador]

OK, I´m going to try this...

thank´s

[Daniel Caçador]

Sorry, I´m don´t know how use this file...
You can learn me?

Thanks

[sandeep_raman]

Extract the tarball.

tar zxfv file.tgz

Check the Readme file for installation instructions.

SRH

[Daniel Caçador]

If not have a floppy in this server...

Have another way?

thanks

[sandeep_raman]

You have to use a USB floppy drive,no other option AFAIK.:(

SRH

[Daniel Caçador]

I dont have....A pendrive work?

[sandeep_raman]

Not too sure if it'll work,give it a try.

PS:Perhaps RH9 may not recognise any USB deivce.
Sorry for the miscommunication(USB floppy drive).

BTW,any specific requirment to use RH9?

SRH

[Daniel Caçador]

I make a boot with the 1st cd of RH9 and select: linux dd

the instalation ask me about the driver, I make a CD with drivers and the instalation software find the drivers on CD, but dont find the driver.....exist another driver? Or I´m a donkey?

Thank!!!

[sandeep_raman]

I don't think drivers on a cd would work.
Did you try the pendrive?

SRH

[Daniel Caçador]

Yes...but I don´t can make work....
You know another way or linux?

thanks.

[Daniel Caçador]

You can send me the page off HP with this information?

thank!

[sandeep_raman]

Which information are you after?

SRH

[sandeep_raman]

If you don't mind,please close this thread http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1056490

Duplicate post.

SRH

[Daniel Caçador]

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1056490
stay close ;)

[sandeep_raman]

http://h18023.www1.hp.com/support/files/server/us/locate/100_5769.html

SRH

[Daniel Caçador]

I solved the problem using a Linux with new Kernel like Fedora core 5.

Thank´s to Sandeep H. Raman!

Daniel Caçador