HPE Community
Operating System - Linux
1833605 Members
3794 Online
110061 Solutions
New Discussion

HP Integrity Itanium Redhat Linux 5.3 and EVA 5000

 
pandora_1
Frequent Advisor

‎09-07-2009 12:42 PM

‎09-07-2009 12:42 PM

HP Integrity Itanium Redhat Linux 5.3 and EVA 5000

Hi all,

I have a new hardware HP integrity server itanium processor installed with REDHAT Itanium lInux 5.3,which has Qlogic HBA card. We have an EVA 5000 SAN Storage running since years. I am trying to present the disk to this Itanium Server, but its not getting viewed/scanned. Fibre Link is OK. Does the EVA 5000 support Redhat Itanium linux? May anyone suggest on this ?

Thanks
Azad
0 Kudos
Reply
1 REPLY 1
Ivan Ferreira
Honored Contributor

‎09-07-2009 02:22 PM

‎09-07-2009 02:22 PM

Re: HP Integrity Itanium Redhat Linux 5.3 and EVA 5000

Have your configured correctly your host and host type on the storage? Where you able to select the server's hba from the dropdown list?

There are some things you need to check, sometimes, the LUNs are not detected unless you reboot the server.

Check also the attached file and try to find a new version of the same document if available.
Por que hacerlo dificil si es posible hacerlo facil? - Why do it the hard way, when you can do it the easy way?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.