Inbound /FCS errors with SLOW FTP transfers

[Tim Killinger]

I'm trying solve a slow FTP tranfere rate problem on my 11.0 rp5450.

- all transfers tested are on local IP segment.
- I 'hardcoded' 100mb full duplex in the NIC
- I'm still getting FCS errors and inbound errors while 'getting' files.

lanadmin reports the following:

icgsva1:/pkg/qpk> lanadmin -g mibstats 0

LAN INTERFACE STATUS DISPLAY
Thu, Jan 9,2003 10:57:12

PPA Number = 0
Description = lan0 Hewlett-Packard 10/100 TX Full-Duplex Man
ual TT = 1500
Type (value) = ethernet-csmacd(6)
MTU Size = 1500
Speed = 100000000
Station Address = 0x306e06a63c
Administration Status (value) = up(1)
Operation Status (value) = up(1)
Last Change = 119276203
Inbound Octets = 2437396
Inbound Unicast Packets = 2193
Inbound Non-Unicast Packets = 1813
Inbound Discards = 3
Inbound Errors = 238
Inbound Unknown Protocols = 1478
Outbound Octets = 113501
Outbound Unicast Packets = 1707
Outbound Non-Unicast Packets = 21
Outbound Discards = 0
Outbound Errors = 0
Outbound Queue Length = 0
Specific = 655367

Ethernet-like Statistics Group

Index = 1
Alignment Errors = 1
FCS Errors = 238
Single Collision Frames = 0
Multiple Collision Frames = 0
Deferred Transmissions = 0
Late Collisions = 0
Excessive Collisions = 0
Internal MAC Transmit Errors = 0
Carrier Sense Errors = 0
Frames Too Long = 0
Internal MAC Receive Errors = 0


Advice?

[Tim Killinger]

whoops!! Wrong forum!! I'll repost in UX administration.