Installing ICE failed

[klemerS]

Hello.

I am doing upgrade from icle to ICE.

First thing is missing lines on preserving ip address shell script “Moving icle to ICE-linux” ( at the end 3 lines ..
echo “ fixed-address $IP “
echo “ option host-name $hostname “
done


I got 5 c7000 enclusers & the OA of each of them give dhcp ip to each blade.

Netmask 255.255.255.0 first enc : 10.57.10.30 – 10.57.10.46 ( 50-66 , 70-86 , 90-106 , 110- 126 )

After installing the Server ( rhel4u6) fixed the /etc/hosts to be
127.0.0.1 localhost.localdomain localhost
10.57.10.2 Ice ( I Must Have Full Qualified name ??? )

Then I start the INSTALL.SH .

I am building the dhcp server on my ice server so the entries for the dhcp was:
netmask 255.255.255.0 , start ip 10.57.10.130 end ip 10.57.10.254

for the Enter the default management processor user name: [Administrator]
Enter the default management processor password:

I put the OA username & password .( IS THIS CORRECT ??? )

The script failed with :

Logging in
Proxy = https://172.17.91.6:50001/mxsoap/services/MxpiMain5_2
java.lang.Exception: Authentication failed.
ERROR: create_MxpiMainService returned 2304
Error: /opt/hptc/cms/bin/setup_cms returned: 1
Error: post install failure


1. My question is : what can cause for such an error ? ( I checked /etc/hosts & I entered the correct username & password during the ice installation )
2. I must install psp8.0 on the cms server ???

Regards

Shalom Klemer.

[klemerS]

Hi.


Everything is working.

I upgrade to v2.01 & everything goes well.

Thanks

Shalom Klemer