ipv6/ipv4

[Werner_15]

Hi all,
who has experiences in building up an scenario
using both protocol-stacks? (V4/V6)
I have tried to use nat-pt (KANE-Project), but I have had problems by installing this. I´ve heard about working scenarios using FreeBSD, but I do not know how it works properly.
Which kind of Kernel-patching is necessary, how
to get nat-pt properly at work.

Additional scenario problem is to use bind9
in both protocol stacks (V4 and V6), who has experiences in this subject.
How I can authenticate differently Lan-connections using V4 or V6 stacks with the Radius-Protocol (Freeradius).
Give me some hints please.
Thank you for your engagement.
sincerely Herbert

[Ragu_1]

You have to enable both IPv4 and IPv6 support and re-compile your kernel. You can use a tunnel broker service from Freenet6 and enable IPv6 routing services using `radvd'. There are IPv6 bind9 and other packages. You should get the IPv6 enabled packages of xtradius to setup radiusd authentication.