jet admin for linux

[Yushu Li]

Could somebody tell me where I can find jetadmin for linux?
I have over 15 jetdirect printers in my LAN. But have not figured out to setup
in Linux RH6.0.
Any advices will be appriated.

[Patrick Watts_1]

Try http://www.hp.com/cposupport/networking/software/hpwj_linux_entargz.html

[Conley Frank]

Hi:

I'm not sure if HP has jetadmin for Linux, but if you are using RH Linux, you
should be able to invoke the printer control-panel, and from there add the
printer. If the printer is a jetadmin device it should have an ip
address....use this or the name if you have it in the /etc/hosts or DNS.

I'm not in close proximity to a linux box or I would give you more detail as to
the steps...but if you can't get it to work drop me an email & I'll outline it
in more detail.

Regards,

-Frank

fhc@rc.atl.hp.com