Nvidia H100 PCIe VBIOS update

[E-ugene]

Hello, I'm having a bit of trouble updating the VBIOS on my H100 GPU with HPE's tool.

https://support.hpe.com/connect/s/softwaredetails?language=en_US&softwareId=MTX_8185a55ddd114fc59016b4563d&tab=Installation+Instructions 

This tool seems to be incompatible with my operating system.  Can anyone help me? Thanks you!

Error message

> ./NVIDIA_H100_PCIe_CEC-00.02.0114.0000.scexe: 234: ./NVIDIA_H100_PCIe_CEC-00.02.0114.0000.scexe: 229: popd: not found
pushd: not found
Usage: HPE Firmware- CEC BIOS ( NVIDIA) flashing Utility
-h|help - Display help
-s|scan - Gather Nvidia Device information
-f|force - Force
-i|interactive - Flashing Interactively

[E-ugene]

It looks like linking sh to bash would fix that issue, but now I'm facing a new one. The tool can't seem to grab the VBIOS info from my H100 GPU, which isn't right, is it? Any idea what's going on?

---> cat gpu.log 

Current Information for Nvidia Devices:

Number of Nvidia GPUs present on System : 1

Device Information:

98:00.0 3D controller: NVIDIA Corporation GH100 [H100 PCIe] (rev a1)

NVIDIA Firmware Information for all Devices:

---> cat console.log 

HPE Firmware- Video BIOS ( NVIDIA) flashing Utility Version 1.0 - output files saved in *.log

Gathering System information(Check system.log).......................Complete!

NVIDIA Firmware Information for all Devices:

Gathering Nvidia Device information(Check gpu.log).......................Complete!

Firmware not found in component for  for index 0

Utility is not built for this device. This is for Graphics Device with Board ID 0x03B1 series of cards.

[Suvamay]

If you have already done and followed the guide, please log a ticket with HPE for further investigation