Red Hat Cluster suite 5 question

[skt_skt]

with out a quorum disk you need to keep the hear beat and RSA on same network

[Alex Ng Chong Yau]

Hi Santosh,

My enviroment,bond0(bond eth0 & eth1 together) network is connect to 2 switch where by the physical connection is eth0 to switch1 and eth1 to switch2, both also in the same network and same ip segment(10.32.1.xxx). Each node ilo is connect to switch1 and is configure Ip with the same segment as the bond0, is this still consider in the same network?. Another thing is i notice that the switch port only show that the speed is running on 100mb, but my lan card is a 1000mb speed will this also affect my cluster/node to startup?. Because went i isolate all the lan to a switch there is no problem and the switch i use to isolate the lan is a gigabit switch.

Thanks.

[skt_skt]

i never observed the lan card and the corresponding switch port in different speed. Make it same on both end.

Even though there are two switches involved and from the IP range you mentioned it belongs to the same subnet.