Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

Problem with p400 controller

 
Highlighted
Occasional Contributor

Problem with p400 controller

I have a BL680c which is booting from SAN and running Windows 2008R2. The OS and hardware are fine but the internal p400 array controller will not start and from Windows device manager displays 'error code 10' device cannot start. The server was ok running 32bit Windows 2008 so I know that the hardware is ok. I have updated firmware to 8.60 and the server is running all of the latest drivers so I'm looking for inspiration.
1 REPLY 1
Highlighted
Occasional Contributor

Re: Problem with p400 controller

HP found the answer, disable the HBAs and update the firmware on the P400 then re-enable the HBAs.