Operating System - Microsoft
cancel
Showing results for 
Search instead for 
Did you mean: 

Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow...

 
SOLVED
Go to solution
Highlighted
Occasional Visitor

Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow...

Hello,

I'm installing actually a new server and i've a problem when INTELLIGENT PROVISIONNING detect my different OS (STD or DATACENTER).

INTELLIGENT PROVISIONNING dectect only DATACENTER Version. I can't install STD (I 've only a standard licence...)

I try SMB install, advanced install...all the time this probleme.

I use a DVDrom usb driver avec officiel HP WINDOWS INSTALL DVD.

Do you have a Idee?

 

Ty

3 REPLIES 3
Highlighted
HPE Pro

Re: Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow...

Hello,

I hope all is well.

I would request you to request you update the server with the latest bios and firmware before OS installation.

Latest Bios:2.32

Latest iLO5 firmware:2.14

Follow the below latest Intelligent Provisioning:3.31 for installing the OS.

Intelligent Provisioning Recovery Media for Gen10

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_912fba32ff7a43e6abe8415ff5#tab-history

Intelligent Provisioning Recovery Media for Gen10 Plus

https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_912fba32ff7a43e6abe8415ff5#tab-history

Try to install OS manually, if the issue still persists after following the above action.

Share the error code or snap.if the issue still persists.

If you feel this was helpful please click the KUDOS! thumb below!   

Regards,


I am a HPE Employee

Accept or Kudo

Highlighted
HPE Pro
Solution

Re: Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow...

Hi,

Try installing windows in manual method/outside Intelligent provisioning.

1. Enter into SSA and create Raid/logical drives.

2. Boot with OS media,

3. Browse and provide smart array controller driver if volume/drive does not show up.

(Download and extract the driver to any pen drive- https://support.hpe.com/hpsc/swd/public/detail?swItemId=MTX_5b8eac1a8fe144b4ae4f537c75#tab-history)

4. Select the volume and proceed to install Windows.

Follow on screen instruction..

hope it helps!.

Regards,

Sudhir

I work for HPE
Accept or Kudo

Highlighted
Occasional Visitor

Re: Win 2016 server STD installation problem (ML 350 Gen10) standard version unknow...

Ho, thx, 

It s oK now