Windows server sur HPE Microserver en RAID 5

[JPHumb]

Bonjour,

Je suis en train d'installer un microserver Gen10 avec windows server et gestion des disque en RAID5.

- Les disques sont installés
- Le systems raid pour les 4 disques a été paramétré en suivant le tuto ( https://www.youtube.com/watch?v=XQAqx0BIZ5I )

- Le début de l'installation windows démare bien mais quand j'arrive au choix de l'emplaceent de l'emplacemet, impossible de trouver le driver qui permettra de charger le système RAID, par rapport aux différentes infos que j'ai trouvé, j'ai chargé différent éléments et driver de chez HP (cp055143.exe; cp056524.exe) Je les ai naturellement executé pour en sortir les éléments sur une clef USB, mais rien y fait, impossible de voir le Volume RAID sous windows.
Quelqu'un a-t'il une solution ?
Merci d'avance de vos réponses
************************************************************

Hi,
I'm installing a Gen10 microserver with Windows Server and RAID5 disk management.

- The disks are installed
- The systems raid for the 4 disks was configured following the tutorial (https://www.youtube.com/watch?v=XQAqx0BIZ5I)
- The start of the Windows installation starts well but when I arrive at the choice of the location, it is impossible to find the driver which will allow loading the RAID system, compared to the various information that I found, I I loaded different elements and drivers from HP (cp055143.exe; cp056524.exe) I naturally executed them to get the elements out on a USB key, but nothing happened, impossible to see the RAID Volume under Windows.

Does anyone have a solution?

Thank you in advance for your answers

[support_s]

System recommended content:

1. HPE ProLiant MicroServer Gen10 - Hardware Troubleshooting

Please click on "Thumbs Up/Kudo" icon to give a "Kudo".

Thank you for being a HPE valuable community member.

[shiva_jr]

Hi JPHumb, 
   you can try creating the RAID and installing the OS using Intelligent provisioning. 
   Please refer this video for more information.  If the Intelligent Provisioning is not enabled, please refer this video.
Regards,
Shiva_jr
Please mark as 'Accepted solution' if my post worked.

[JPHumb]

Hi @shiva_jr ,

I looked at all the document, no information on the vision of RAID disks on the Windows installation

regards