Boot I64 server from HSG80 storage

[Toine_1]

Hello,

Is is possible to boot a I64 from HSG80 storage.
I moved a system disk via shadow copy from a EVA box to a HSG80 box.
I used @sys$manager:boot_options to define a new boot device on HSG80.

I tried to reboot the I64 server but it doesn't find this boot device on HSG80.

Did I do something wrong?

All help is welcome.

/Toine

[Duncan Morris · Accepted solution]

Toine,

have you set up the HSG80 to allow connection from the I64 system to the target device?

Can you post the result of SHOW Dxxx from the HSG for that unit.

HSG13_T>show d16
LUN Uses Used by
------------------------------------------------------------------------------

D16 M183343
LUN ID: 6000-1FE1-000D-7D50-0009-1130-4389-0114
IDENTIFIER = 1316
Switches:
RUN NOWRITE_PROTECT READ_CACHE
READAHEAD_CACHE WRITEBACK_CACHE
MAX_READ_CACHED_TRANSFER_SIZE = 128
MAX_WRITE_CACHED_TRANSFER_SIZE = 128
Access:
DEVT02AB1, DEVT02AT1
State:
ONLINE to this controller
Not reserved
PREFERRED_PATH = OTHER_CONTROLLER
Host Based Logging NOT Specified
Size: 35556389 blocks
Geometry (C/H/S): ( 69719 / 2 / 255 )
HSG13_T>


Duncan

[Toine_1]

Hi Duncan,

Yes the I64 server has access to this unit on HSG80 storage.
I have booted the I64 server again from the EVA storage box.
The server is up and running and I'm able to mount that disk on the HSG80 box.

/Toine

[Duncan Morris]

Toine,

try looking through this thread

http://forums13.itrc.hp.com/service/forums/questionanswer.do?admit=109447627+1253721944900+28353475&threadId=1325161

and follow up on some of Hoff's and Colin's suggestions and links.

Duncan