Operating System - OpenVMS
1748279 Members
4212 Online
108761 Solutions
New Discussion юеВ

DECNET/SNARJE connection problem

 
Lucie
Frequent Advisor

DECNET/SNARJE connection problem

I am having a connection problem connecting to the mainframe via decnet/snarje. I thought maybe someone would have an idea what the error means. Any help would be greatly appreciated

%SNARJE-E-GWYCONREW, workstation connect request rejected by IBM host, sense code %X'0857'
Thanks
3 REPLIES 3
Jim_McKinney
Honored Contributor

Re: DECNET/SNARJE connection problem

You might check with the folks on the IBM side of the link and see if JES2 (or whatever) is available for RJE connections (x0857 suggests it is not).
Robert Gezelter
Honored Contributor

Re: DECNET/SNARJE connection problem

Lucie,

I would start with seeing if your people on the IBM side can clarify what happened from their logs. Remember that there is no guarantee that the time on your system corresponds precisely to the time on the IBM host.

Have been there and done that. Worst case, it comes down to running a line trace and seeing precisely what transpired between the two systems.

- Bob Gezelter, http://www.rlgsc.com
Lucie
Frequent Advisor

Re: DECNET/SNARJE connection problem

The network folks finally realized an application called snarjp was not started on the mainframe.
thanks for your suggestions.