how to change node name.

[ora_lion]

rx6600 openvms

I bad installed system.but the node name is
node1,i want to change node1 to masic1.How can i do this?

[ora_lion]

one node name is node1,another is node2.
i want to change node1 to masic1,and change node2 to masic2.

[Dave Gudewicz]

Read this:

http://64.223.189.234/node/589

HTH

[Robert Gezelter]

ora_lion,

This question gets asked frequently on ITRC. I recommend cross checking my somewhat hurried answer with some of the previous posts on this question.

In short, there will be at least four places where node names occur:

- SCSNODE (in the parameter file, accessed using SYSGEN or SYSMAN)
- the DECnet configuration
- the TCPIP configuration

Queue names and some device names may also be affected, please check your configuration. For safety, I when doing this type of work I often create a clone of the SYS$SPECIFIC directory tree (e.g., SYS1) so that it is not difficult to recover from an error.

- Bob Gezelter, http://www.rlgsc.com