1825085 Members
4917 Online
109679 Solutions
New Discussion юеВ

Mylex DAC960 RAID

 
SOLVED
Go to solution
James Mehlhop
Occasional Contributor

Mylex DAC960 RAID

I recently purchased a PWS500au and installed VMS 7.3-2 on it. Works great, BUT I have never had a raid controller before and do not know how to add/upgrade disks on the raid controller. Is there a manual somewhere online/CD that I can read to figure out how to do this?
5 REPLIES 5
Robert_Boyd
Respected Contributor
Solution

Re: Mylex DAC960 RAID

See this recent thread for several links/references:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=980820

Cheers,

Robert
Master you were right about 1 thing -- the negotiations were SHORT!
James Mehlhop
Occasional Contributor

Re: Mylex DAC960 RAID

Thanks.

I now have to see if I can find a copy of the floppy with the RCU on it. :-(

Jim
Ian Miller.
Honored Contributor

Re: Mylex DAC960 RAID

you can download the necessary from
ftp://ftp.compaq.com/pub/products/alphaserver/storage/controllers/kzpac/
____________________
Purely Personal Opinion
Duncan Morris
Honored Contributor

Re: Mylex DAC960 RAID

James,

you will not need to look too far! The RA200RCU and firmware goodies are all on the firmware CDs. If you do not have one, then you can download the iso image from
ftp://ftp.digital.com/pub/DEC/Alpha/firmware/index.html

I copied the RCU to floppy for convenience
James Mehlhop
Occasional Contributor

Re: Mylex DAC960 RAID

Thanks. Went to web site and downloaded.