reg:host name

[p.balamurugan]

when i issue the command show network. I am unable to see the host name. how to correct this problem.

[Simon Fedele]

Have you configured TCPIP Services yet ?

@sys$manager:tcpip$config

Please also post output of "show network"

[Jiri_5]

Have you in systartup_vms.com this line?

$ @Sys$Startup:Sys$Net_Services

[The Brit]

Please post the output from

$ pipe show log | search sys$input

Dave

[The Brit]

Also can you confirm which TCPIP stack you are using! i.e. TCPWARE, TCPIP Services, Multinet, etc.

Dave

[Willem Grooters]

No names means "no network".

SHOW NETWOK will show the nodenames - and addresses - only if networking has been configured - either TCPIP, DECNet or both. Default for an OpenVMS installation is NO NETWORK, you have to configure it explicitly.