Operating System - OpenVMS
1826027 Members
3032 Online
109690 Solutions
New Discussion

Re: Shadowing two disk with different size

 
Luis_139
Occasional Contributor

Shadowing two disk with different size

Hi All,

For OpenVMS 7.3, How can I initialize one disk with less blocks? I mean.

I need to shadowcopy a disk with 35556389 blocks to another new one. This new one has 35557376 (1029 more), but I need just 35556389 for ShadowCopy.

Is it possible to initialize this new disk with just 35556389 blocks in order to be shadowcopied? If so, please send me the command line sentences

By now, we cannot upgrade to 7.3.2 and backup-restore is not an option because we have to migrate 300 GB in less than 3 hours.

Thanks in advance.
6 REPLIES 6
Ian Miller.
Honored Contributor

Re: Shadowing two disk with different size

Same question as here
http://www.openvms.org/phorum/read.php?f=6&i=948&t=948

Disks are on a HP MA8000 disk array and Luis wants to move to a Hitachi 9570V
____________________
Purely Personal Opinion
John Gillings
Honored Contributor

Re: Shadowing two disk with different size

Luis,
Sorry, dissimilar size shadowing is minimum V7.3-2.

The installation of V7.3-2 is fast, simple and is completely transparent to application software. It's little more than a large patch.

You *may* be able to fiddle this on a controller but that's a very poor second best to doing it properly.
A crucible of informative mistakes
Luis_139
Occasional Contributor

Re: Shadowing two disk with different size

Hi Jhon,

thanks for your help, as I have already notice upgrading to 7.3.2 is the best choice but it is our last option.

Could you explain a little more what is that other procedure (the fiddle one) you wrote about?? Maybe it could be the only option we have

Thanks a lot

Mike Reznak
Trusted Contributor

Re: Shadowing two disk with different size

Hi,

here is fairly old answer from OpenVMS wizard.

http://h71000.www7.hp.com/wizard/wiz_4715.html

It probably won't bring more light into your case.

Mike
...and I think to myself, what a wonderful world ;o)
Allan Bowman
Respected Contributor

Re: Shadowing two disk with different size

Is this VAX or Alpha? I have used a product called MagicDisk on a number of microVAX systems in the past (VMS v5.3 through v6.2) - unfortunately it is not available at all for Alpha, but it is still supported on VAX (at least to 7.3). The product allows you to create container disks (virtual disks) on a volume so that you could shadow different sized disks. We used it to create a shadow set between an RZ26 and an RZ28 where the shadow disk looked like an RA82.

Allan
Ian Miller.
Honored Contributor

Re: Shadowing two disk with different size

If you want to try container files then LD is also available.
http://h71000.www7.hp.com/freeware/freeware70/ld/
____________________
Purely Personal Opinion