UCX Log Option

[Mainak]

Hi ,

I am trying to enable the option in UCX with the following command -

$ ucx set service telnet/log=(file=sys$manager:aaa.log)

It is not returning any error. But when I am checking it ( ucx show service telnet / fu ), it is showing -

Log Opt: Actv Dactv Conn Error etc
file: not defined

Ucx version is 4.2

Please Advise

Mainak

[Wim Van den Wyngaert]

Add /perm to the show command.
You need to disable / enable the service before it is active.
Be aware : this will disconnect all sessions.

Wim

[Mainak]

Its not accepting the /perm option with the command.

[Wim Van den Wyngaert]

Did you do
ucx show servi telnet/perm/fu ?

Wim

[Mainak]

when I am using -

$ UCX SET SERVICE TELNET/LOG=SYS$MANAGER:AAA.LOG/PERM

It is returning -

%CLI-W-IVQUAL, unrecognized qualifier
\PERM\

[Ian Miller.]

/PERM is a qualifer for SHOW SERVICE. It shows what settings you will get after you restart.

[Mainak]

There is no change befire and after the command -

$ UCX SH SERVICE TELNET/FU/PERM



Service: TELNET



Port: 23 Protocol: TCP Address: 0.0.0.0

Inactivity: 1 User_name: not defined Process: not defined

Limit: 50



File: not defined

Flags: Listen Rtty UCX



Socket Opts: Keepalive Rcheck Scheck

Receive: 3000 Send: 3000



Log Opts: Actv Dactv Conn Error Logi Logo Mdfy Rjct

File: not defined



Security

Reject msg: not defined

Accept host: 0.0.0.0

Accept netw: 0.0.0.0
$ UCX SET SERVICE TELNET /LOG=FILE=SYS$MANAGER:AAA.LOG

$ UCX SH SERVICE TELNET/FU/PERM

Service: TELNET

Port: 23 Protocol: TCP Address: 0.0.0.0
Inactivity: 1 User_name: not defined Process: not defined
Limit: 50

File: not defined
Flags: Listen Rtty UCX

Socket Opts: Keepalive Rcheck Scheck
Receive: 3000 Send: 3000

Log Opts: Actv Dactv Conn Error Logi Logo Mdfy Rjct
File: not defined

Security
Reject msg: not defined
Accept host: 0.0.0.0
Accept netw: 0.0.0.0

[Wim Van den Wyngaert]

ucx 4.2 eco 1 : same behaviour.
Bug ?

Wim

[Mainak]

UCX> sh ver

Digital TCP/IP Services for OpenVMS VAX Version V4.2 - ECO 5
on a VAX 4000-106A running OpenVMS V7.1

[Wim Van den Wyngaert]

It works for service ftp.
The program must think that it has no use for telnet and thus ignores the option.

Wim

[Mainak]

Could any one tel me about the following -

UCX> show dev bg1396/fu
Device_socket: bg1396 Type: STREAM LOCAL REMOTE
Port: 23 1216
Host: TGDV12 THDV42
Service: TELNET Terminal: TNA1:

RECEIVE SEND
Queued I/O 0 0
Q0LEN 0 Socket buffer bytes 0 2
QLEN 0 Socket buffer quota 3000 3000
QLIMIT 0 Total buffer alloc 0 1828
TIMEO 0 Total buffer limit 12000 12000
ERROR 0 Number of XONs 0 0
OOBMARK 0 Number of XOFFs 0 0
I/O completed 243 386
Bytes transferred 390 13575

Options: REUSEADR KEEP OOBINLINE
State: ISCONNECTED PRIV
RCV Buff: WAIT
SND Buff: SEL



What is the meaning of the bottom section -


Options: REUSEADR KEEP OOBINLINE
State: ISCONNECTED PRIV
RCV Buff: WAIT
SND Buff: SEL
i.e. -> Option: keep or Option: REUSEADR or RCV Buff: WAIT etc ..

Could any one provide me any document explaing this all for UCX 4.2.

Thanks.

[Wim Van den Wyngaert]

Options: REUSEADR KEEP OOBINLINE

oobinline indicates Out Of Band (exception handling)
keep stands for keepalive
reuseadr indicates that bind may reuse local information instead of rebinding

State: ISCONNECTED PRIV

isconnected is what it says
priv is ???

RCV Buff: WAIT
SND Buff: SEL

??? Google ???

Wim

[Jan van den Ende]

Mainak,

UCX 4.x is a bit faded in my memory, but ISTR that it behaved a lot like TCPIP services.
The syntax of things IP has always been a little (too much in my opinion) non-VMSsy, but Unixian.
Instead of /PERM it is:
$ TCPIP CONFIG SET whatever is to be set
for the PERMANENT info. And yeah, it needs a restart.

hth

Proost.

Have one on me.

jpe