9300i CD-writer problems

[Derek Hay_1]

I just got a 9300i cd-writer and i know i hooked it up correctly on my ibm aptiva 2158-254. It copies data fine but when i go to copy music cds from mp3s it gives me a write speed error when i use a write speed any higher than 4x. The error message reads as follows:
#######
Response: -10 - Disc Write Error - Command:E1 Sense:03 ASC:0C ASCQ:08

The CD-R or CD-RW disc may be scratched, damaged, or dirty
If the CD-R or CD-RW disc is scratched, damaged, or dirty, your HP CD-Writer may not be able to write data or audio to it.
########
If anyone knows how i can get the cd writer to its potential of 10x not 4x please let me know.

P.S. This thread has been moved from Storage > General to Optical Jukeboxes & Drives. - Hp Forum Moderator

[Christine Clark]

I have a 9350i and after installing the hp software under win 2000 I no longer have CD-ROM's!!!! Many people all over these forums have been complaining about this for weeks now and there isn't one resolve issue! This is insanity!!! THE PRODUCT CLAIMS TO BE COMPATIBLE!!!!!!!!
PLEASE POST ANY RESOLVES IN DETAIL THAT YOU FIND - if you're that lucky!!!

[Rose P. Martin-Stinson]

Hi Derek, I have the 9300i and it has worked fine for 4 years, but now suddenly it stops in the middle of a copy with a write error. Something about a high speed disk. I have been using the same disks for the last four years with no problem. If you have found a solution please post it. Thank you.

Rose