Optical Jukeboxes and Drives
1851360 Members
2041 Online
104058 Solutions
New Discussion

Re: GSP Test LED Blinking

 

GSP Test LED Blinking


I have a problem with GSP test LED in the Core IO board in the N-Class server.The particular LED is in Blincking state.

Please let me know what is the cause for this and how to overcome from this issue.
I was carrying out some testing on serial port to be configured with Host Security Module,

Thanks
To get out of a difficulty, one usually must go through it
4 REPLIES 4
Michael Steele_2
Honored Contributor

Re: GSP Test LED Blinking

I believe that you're referring to the 'self test' LED and when yellow this indicates a POST failure. Post = Power On Self Test. So I'd say it time to put in a service call about it.
Support Fatherhood - Stop Family Law

Re: GSP Test LED Blinking

No this is not Self test.This LED is locate in the Core IO board.There are two more LEDs,GSP Power etc.
The particular GSP test LED blinks in RED.

I don't get any console out even.If I reset the GSP will this can be solved.
Will GSP reset reboot the system or only the GSP.Because this is a production server.
To get out of a difficulty, one usually must go through it
Marlene Smith
Advisor

Re: GSP Test LED Blinking

you can reset the GSP w/out having to drop the box - on an N class - should be a little button - push and hold for a few seconds, should reset the GSP. There is also a command line way:
# stty +resetGSP
HTH
Marlene Smith
Advisor

Re: GSP Test LED Blinking

you can reset the GSP w/out having to drop the box - on an N class - should be a little button - push and hold for a few seconds, should reset the GSP. There is also a command line way:
# stty +resetGSP
HTH