RDP 2.0 Error 5 during Script Execution

[J Brennan_1]

I am new to RDP.
I have installed RDP 2.0.
I am using "2B - OS Installation (Scripted)" - "Deploy Windows 2003 Standard (ProLiant ML/DL/BL)" script.
I get Error 5 during script execution. Red X appears next to Run Script - Copy ProLiant files.
During troubleshooting I see that the 'Deploy Image' .\lib\images\FAT32.IMG does not produce a C: partition, therefore the following Run Script - Make Bootable Partition is failing.
What am I missing?

[Rob Holden · Accepted solution]

I have seen this same message. When asked for a Windows 95/98 CD did you use a Windows 95 CD.

This is what caused the error for me. This is fine if you are dealing with partitions 4 GB or less. Use only the Windows 98 CD.

Rob

[J Brennan_1]

Win 98 CD fixed issues.
Thanks

[Al Harrison]

I've seen this error as well using RDP 2.1 on several Proliants intermittently & I used the W98SE cdrom for the boot files when prompted during the installation.