ILO Federation: no peers

[ralfgro]

Hi,

I'm trying to setup ILO Federation for a couple of DL380Gen10 server. I did not change much on the iLO Federation page, I can't see any other devices. I created a new group, chose a key, and configured this group an 3 ILO's. But they just don't see each other. ILO configuration is IPv4. Do I have to add an IPv6 address for this to work? iLO's are in the same VLAN. I don't know for sure if IPv6 Multicast is enabled. Isn't there an option to add IPv4 addresse manually to get this to work?

[soupic]

Please refer page number 52, 53 in the below document.

https://support.hpe.com/hpesc/public/docDisplay?docId=a00018325en_us

also refer https://support.hpe.com/hpesc/public/docDisplay?docLocale=en_US&docId=emr_na-a00030026en_us

[ralfgro]

I already know this document and the FAQ. But this did not help.