Raid controller performance

[gogalai]

Hello,

I need help choosing a better RAID controller(s) for DL380 Gen11. We have several virtual machines running Oracle databases, and latency is very important.

Which option would provide better performance: 2 x MR416i or 1 x SR932i?

[Harshitha_K]

Hi @gogalai,

Here are the SR and MR controller specifications:
 MR216i-p controllers with impressive performance, including up to 13,700 Mbs of bandwidth, 3 million random read IOPS, and 240K RAID5 random write       IOPS.
The HPE SR932i controllers feature up to 46 GB/s bi-directional throughput and up to 3.5M IOPs.

On the basis of this specification, please configure the controllers accordingly .

Regards,
Harshitha
If you are satisfied with the answer then kindly mark the topic as "Accepted Solution".

[nasara10]

@Harshitha_K Hi,

Have the same case,  I read all these datasheets and know about numbers, But Intrested if someone tested both controllers, and which sollution is better for OLTP

[Harshitha_K]

Hi @nasara10 ,

If you need more details, please raise a support case, so that you may get practical assistance from an HPE Support engineer.

If you're not concerned about further details and just need information, you can refer to the available documents in HPE Support Center.

Thank you!