ProLiant Servers (ML,DL,SL)
cancel
Showing results for 
Search instead for 
Did you mean: 

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

 
Highlighted
Occasional Advisor

Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

I have Proliant ML10 gen9 (838124-425) just from the box.

I prepared CD with Smart storage Administrtor to create RAID1 but it says "No controllers detected". Then I prepared USB using HP tool with SPP 04.2016 but says "2.822161J i8042: No controller found" and after that nothing is happening.

Please help me with it. I'm going crazy...

13 REPLIES 13
Highlighted
Honored Contributor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

The ML10 Gen9 uses the Intel RST SATA RAID controller. HPE SSA only recognises controllers in the Smart Array family. This document explains how to setup the system.

Setting Up and Configuring Intel AMT and RAID Volumes on HPE ProLiant ML10 Gen9 Servers

http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=1008686780&docId=emr_na-c04996527&docLocale=en_US

 

No support by private messages. Please ask the forum! 
Highlighted
Acclaimed Contributor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

According to the quickspecs this server has no smart array controller, hence HPE SSA cannot find one.

This is a controller chip from Intel, I assume you can mange it from BIOS.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Occasional Advisor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

Thank you for your reply! But in the very begining I started exactly from this point.

In the result - starting installation with VMware 6.0  Installer I recieve dialog about the place for installation, and it says that I have two sata per 1 Gb each but not one drive per 1 Gb as I am expecting after setting up RAID.

Or it is normal?

Highlighted
Acclaimed Contributor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

You may check the user guide for correct cabling:

http://h20565.www2.hpe.com/hpsc/doc/public/display?sp4ts.oid=1008686780&docLocale=en_US&docId=emr_na-c04960468

Maybe you have another optional controller installed (H241)? Likely not.

But maybe you can use the disks as a RAID or as plain disk if connected to the Intel chip ...


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Highlighted
Honored Contributor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

For this RAID to function you need a driver. The ML10 Gen9 is not listed on the VMware from HPE Certification and Support page as a supported server. http://h17007.www1.hpe.com/us/en/enterprise/servers/supportmatrix/vmware.aspx#.V72wjk32bDA

 

You could try adding in the supported HBA which uses the standard hpsa smart array driver

 

 

 

No support by private messages. Please ask the forum! 
Highlighted
Occasional Advisor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

Thank you for reply! Cables are ok....

Occasional Advisor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

Thank you for your advise! But it doesn't make me understand what exactly to do...

I tryed to install custom HPE ESXi Image - same result.

How and where should I put this driver, and maybe stupid question, but wich exactly driver should find... 

I'm totally crazy with it for last two days.

Highlighted
Honored Contributor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

I don't know that there is a driver for ESXi. This server is not listed as certified and supported to run VMware products.  You could try using an H240 HBA, but that controller isn't listed as supported in this model server

No support by private messages. Please ask the forum! 
Highlighted
Occasional Advisor

Re: Smart Storage Administrator doesn't detect array controllers Proliant ML10 gen9 (838124-425)

Not very happy to hear it, but what if you are right and I have H240 HBA inside, how can I install the driver without system?

And is there any possibility to check what kind of controller is inside?