HPE Community
Security e-Series
1819719 Members
2845 Online
109606 Solutions
New Discussion

HP 10504 Authentication Issue

 
NickChatz
Occasional Advisor

‎09-27-2016 03:12 AM - edited ‎09-29-2016 02:23 AM

‎09-27-2016 03:12 AM - edited ‎09-29-2016 02:23 AM

HP 10504 Authentication Issue

Good morning Lads ,

I am having the following issue . Our support team is trying to connect to our backend switches (HP 10504 ) but they can not. They only have local accounts and access it like that .

What configuration should be done on Windows Radius to have it working and what is specific parameter to configure in order to allow a user to become admin?

I am appreciating all the help i can get.

 

UPDATE :

The radius configuration with the new firmware upgrade works on the front switches 5500 series but not on the back switches 10504. You can login to the backswitches but not as admin. I check the Windows radius server and there is a specific parameter under vendor policy for Hp 5500 series switches which works. I suppose there must be an additional vendor specific parameter ( Configure VSA ( RFC complaint)  ) for the Hp 10504.

 

Any ideas?

===============================
If my answer helped you don't forget to Kudos
===============================
0 Kudos
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.