help on setting up a disk threeshold

[Jack_94]

I created a "New Control task/set disk threshold" with a follow seting. (The critical threshold is set for 95% and the reset value is 93%. The warning threshold is set to 90% and the reset value is 88%. The interval value is set to 28800 seconds. It is applied to All Event and schedule to run once a day.)

For my Notification task, I have an "Event by critical run when criteria meet"

I am getting the emails correctly but continuously by the same nodes. Any ideas

[Brett Boone]

I would try using a device query to deploy the settings to instead of an event query. Event queries are suppossed to be used to filter events; not group devices.