VCDB problem

[Rob Mills]

while trying to enable the VCDB on a new server. I get the following error in the log

Not enough storage is available to process this command

I know the username and password and server name are correct, but it won't make the connection.

thanks

[Brent Ingler]

Uninstall the Compaq agents, completely, reboot, and re-install the agents. I was running into this too, and found that this was the only way to solve the problem.

Brent

[Rob Mills]

thank you, I'll try that and return the results

[Eric Baragar]

did not work, any other ideas ?

[Eric Baragar]

as it turned out, this was an SNMP community string issue. Although we thought we had it setup properly, had to temporarily add public at read-create in order to get it to work.

thanks

[Keith Boesel]

I was having the same problem. I noticed that the machines that had SNMP configured to accept SNMP from any host worked, but the machines that would only accept from certain hosts were not working. When I added the host 127.0.0.1, everything worked fine.