HPE Community
Server Management - Remote Server Management
1752800 Members
5653 Online
108789 Solutions
New Discussion

Codepage problems and ILO/RIB

 
Internet Admin
Occasional Contributor

‎07-26-2003 02:01 PM

‎07-26-2003 02:01 PM

Codepage problems and ILO/RIB

We need to run some servers in NON-english/437 mode. The clients, accessing the RIB/ILO are never English/437 machines.
This is not a problem when using PCI-based RIB cards in DL380/360 but the IL(almost)O, specifically the DL380G3, does not correctly translate. Why the difference and what to do about it.
0 Kudos
Reply
1 REPLY 1
Junior Yharte
Trusted Contributor

‎07-29-2003 09:52 AM

‎07-29-2003 09:52 AM

Re: Codepage problems and ILO/RIB

The difference here was unintentional. This will be corrected in a future release of the F/W. For now, if the locale settings on the client and the server match, you can leave iLO on 437 and it should work just fine.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.