HPE Community
Server Management - Remote Server Management
1752323 Members
5604 Online
108786 Solutions
New Discussion юеВ

How to reset ILO

 
krishnakanth
Occasional Advisor

тАО11-09-2005 12:10 PM

тАО11-09-2005 12:10 PM

How to reset ILO

Hi all...

I am able to ping ILO interface. But i am not able to do SSH. During POST I am getting an error message which reads out saying " Integrated Lights on Management is temporarily Unavailabe (1) " How to handle this problem ??
0 Kudos
Reply
3 REPLIES 3
Ruslan
Respected Contributor

тАО11-09-2005 07:58 PM

тАО11-09-2005 07:58 PM

Re: How to reset ILO

Can you login via https access? Verify iLO settings pressing F8 during boot process.
0 Kudos
Reply
acartes
Honored Contributor

тАО04-03-2006 10:55 AM

тАО04-03-2006 10:55 AM

Re: How to reset ILO

This sounds like the iLO is unable or unwilling to boot. I would recommend updating the iLO firmware by booting to the SmartStart firmware update CD. This will upgrade the iLO firmware and also reset the iLO processor. After that, iLO should be available.

Note that you may need to set the iLO security override switch to allow the upgrade to work.
0 Kudos
Reply
acartes
Honored Contributor

тАО05-05-2006 02:45 AM

тАО05-05-2006 02:45 AM

Re: How to reset ILO

If it is still unresponsive, you may want to try resetting iLO to defaults. You can do this from the host using HPONCFG:

http://forums1.itrc.hp.com/service/forums/questionanswer.do?threadId=1017653
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.