ip-adress for the ilo

[anneli nilsson]

Hey
How can I see the ip-adress for the ilo without restarting the server. And how do I change i ip-adress?

[Rajeshwari, Hiresave]

If the host OS is Windows or Linux, use the HP online configuration utility to run RIBCL/XML scripts from within the host OS.

Utiliy would work if you have iLO management interface driver installed on you host.

The utility and XML sample scripts are available in the HP website.

More information on RIBCL scripts and the utility are available in the iLO command-line and scripting guide.

[anneli nilsson]

Where do I find this online tool?

[Rajeshwari, Hiresave]

Please follow the following steps for that ...
a) Go to the link http://h18023.www1.hp.com/support/files/server/us/
b) Locate software by catagory after giving suitable operating system and "Software - Lights-Out Management" for catagory.
c) You will find the link for the downloadable components of HP Lights-Out Online Configuration Utility and the HP Lights-Out XML Scripting Sample in that web page.

The utility is also available with 7.30 and 7.40 Smart start CDs.

If you need Lights-Out drivers and system management agents, you would find them in the same location, but under a different catagory for download or you can find them in the Smart Start CD.