Set-HPEiLOAccessSetting and Set-HPEiLOFirmwareVerificationScanSetting failing

[BrianBagley]

The cmdlets Set-HPEiLOAccessSetting and Set-HPEiLOFirmwareVerificationScanSetting are both failing with the error "Target url(s) could not be located". 

If i add the -debug parameter it appears both cmdlets have the same stack trace: 

ExceptionMessage:Target url(s) could not be located..
InnerException:.
StackTrace: at HPE.iLO.Communication.Redfish.Model.SetModel.SetMapperUrl()
at HPE.iLO.Communication.Redfish.Model.SetModel.ValidateRecord(CmdletRecord cmdletRecord)

The PS module is version 3.2.0

Ilo Firmware 2.60 

Any guidance for a workaround or if this is a known issue when the fix may be be released.

[Sham82]

Hi Brian, 

Please let us know if it was working before.

please downgrade the firmware and check.

HPE iLO Cmdlets

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_771234e509094caf9b7a41888a#tab-history

ILO Firmware 

https://support.hpe.com/hpesc/public/swd/detail?swItemId=MTX_9cef067887f74aaaa6eb0542a6#tab-history

If you feel this was helpful please click the KUDOS! thumb below and accept the solution.

[BrianBagley]

Hello,

This is a new script to automate the config so I do not know if they would have worked previosuly.  Your link for the firmware is actually higher than our curent firmware version so I will try and upgrade it first then reply.

Thanks,

Brian