Server Management - Systems Insight Manager
1834154 Members
2135 Online
110064 Solutions
New Discussion

Re: Disk thresholds

 
EricL_1
Occasional Contributor

Disk thresholds

I am attempting to configure Disk Thresholds on my servers (Proliant ML370s). They are sending alerts when they lose power redundancy, go down, hard disk errors, etc. I am using my own customer SNMP String (ex: SN1MP set to Read/Write). When I try to use SIM to configure the the Disk Threshold, SIM comes back saying: "Could not set the disk threshold, the agent did not accept the request". My first server is running Windows 2000 Server SP4, latest PSP and Management Agents. Any ideas?
1 REPLY 1
Rob Buxton
Honored Contributor

Re: Disk thresholds

Check that the server has SNMP Sets Enabled.
From the servers SMH, go to the Settings Tab -> SNMP and Agent Settings, check the Management Agents section and that SNMP Sets are enabled.

This item can be configured in the cp00xxxx.exe file for the SMH so that this setting is deployed when the agent is deployed.