DL380 G3 - RAID 5 Problems!

[kis.charles.russell]

Smart Array 5i in the system.

The system has a raid 5 configuratin.
The Array consisted of 3 - 36gb 10k Rpm drives.

One of the drives failed. Due to a little age on the server we had some difficulty getting a 36gb as a replacement so we put a 72gb in it's place.

The drive is being recognized, and seen properly and with the 72gb size.

It's never been an issue till now to put in a larger drive than what was in the system, and have it rebuild the array.

Problem: The system is not rebuilding the array as it should with the larger drive in place.
Any suggestions? Is this a known issue?