Server Management - Systems Insight Manager
1833883 Members
1578 Online
110063 Solutions
New Discussion

Error communicating with Version Control Agent

 
SOLVED
Go to solution
PhilC_1
Advisor

Error communicating with Version Control Agent

Hi - I'm running HP SIM 6.1 on W2K8R2.

The following symptoms are happening on some (but not all) servers:
- Server is discovered, Managed System Setup Wizard has run etc. All complete without any errors.
- I can click on the various headings (HS, MP) and because the systems trust each other the relevent angents launch without having to go through another sign-on process.
- Version Control Agent: if I access the VCA through the "Tools & Links" screen then, as mentioned previously, the tool launches and I access the VCA without an additional sign-on
- However, if I try to access the VCA via the "SW" icon, or from the System Status/Health Status screen then I get the following error message:
"Error communicating with Version Control Agent
There was an HTTP error with the Version Control Agent (VCA) on this system. In slower environments this could be because HTTP requests are timing out. To correct this run the command

mxglobalsettings -ld http_request_timeout

This will return the current HTTP timeout value, in seconds (the default is 15). Increase the setting using

mxglobalsettings -s http_request_timeout=x

where 'x' is the new timeout value. Note that adjusting this setting will affect HP SIM performance and should be used carefully."

Is there a of telling the CMS that there is no communication problem?

Any help would be appreciated, thanks.
Phil
5 REPLIES 5
Paul.cole
Occasional Contributor
Solution

Re: Error communicating with Version Control Agent

Have you tried selecting the server(s) and going up to Configure>Manage Communications and updating it. Once it's finished, it should tell you where the problem may lie.

I had a similar problem and it was down to the SNMP settings, i hadn't updated SNMP to show the new HPSIM server (recently moved it from server to another)

Paul
OJ0815
Occasional Contributor

Re: Error communicating with Version Control Agent

I have exactly the same issue using HP SIM 6.2 on W2K3 R2.

The strange thing is, if I run an inventory once from within System Management Homepage using the alias /vcagent and do a manual "Software version Status Polling", VCA gets "green" within the System Status Health page and by clicking on the symbol the VC agent page is displayed correctly. Afterwards on the SMH the VC Agent is displayed which was completely missing before.

But after the next automatically scheduled "Software Version Status polling", the status gets back to the "System Communication error".

Checking Configure -> Manage Communications for a server that has that problem says everything is okay.

Any help would be appreciated.
Oliver
TechGuru
Trusted Contributor

Re: Error communicating with Version Control Agent

Increase the SMH timeout value to atleast 60 secs for better response.

use replicate agent settings to apply the settings to multiple SMH in network.
OJ0815
Occasional Contributor

Re: Error communicating with Version Control Agent

That did not change anything. It's still the same.
OJ0815
Occasional Contributor

Re: Error communicating with Version Control Agent

We had a similar issue before using SIM 5.2 which was fixed by a hotfix from here

http://h18013.www1.hp.com/products/servers/management/hpsim/dl_windows52sp2.html

And now, after upgrading from 5.2 to 6.2, the VCAgent on every single node is shown with an "i" symbol for the software status in the system list after the automatic Software Version Status Poll had been running last night.

But alarms are being generated correctly by the VCAgent, it seems like just the display in the system list is broken (again).