File System Space Used

[Latif Yahya_1]

After I try and set the disk space percentage for both C and D drives and click on Save Thresholds, I get an error message saying 'HP Web Agent HTTP Post Error' and below it continues 'An error occourred attempting a SNMP set request. Invalid type of post request or parameters missing.'
Any ideas what it means?
This is only happening on some servers. Most of them are ok. I have compared the SNMP settings in services on both and can't see anything different!

[Luis Valencia]

Check if Enable Sets is selected in the Insight Management Agents Applet in Control Panel


Luis

[Latif Yahya_1]

Enable SNMP Sets IS checked.
However, restarting the agents seems to have fixed the problem!
Thanks.

[Rob Buxton]

I see this quite a lot. Sometimes just repeating the request a few times fixes the problem.
Not sure of the cause, sometimes if I've moved a number of sliders I find that the request has been partly filled and some of the sliders have been set. Some are set but not where I set them to.
It's happened with various combinations of Agents and Insight Managers.