HP insight manager SIM 4.1

[Nasser_4]

When I select the options -> Versioncontrol repository. the following message appears.
Error, the Version Control Repository Manager (VCRM) was not found on any discovered systems. If the VCRM is installed, be sure it is running and that the system it is running on has been discovered by HP Systems Insight Manager. To verify the VCRM is identified, view the Links tab on the system's Device Page. If the system is discovered, but the VCRM does not appear on the systems' Links tab, run an Identify Systems task to that system.
Can any one help

[Rob Buxton]

Well the obvious question, have you installed the VCRM anywhere?
It can be installed on any system but most folks install it on the same Server as HPSIM.

If you have not installed it, check out:
http://h18007.www1.hp.com/support/files/server/us/download/20309.html

Install on your Server and then re-identify the Server. The link should then appear.

[Nasser_4]

The VCRM is already installed on the same server.

[Anthony_127]

Open a web browser and open the URL:

http://servername:2301

Where servername is the server you have VCRM installed.

If it is installed, you should see an option on the left side under INTEGRATED AGENTS for a link to the VERSION CONTROL REPOSITORY MANAGER.

Click on the link and should be able to configure the VCRM settings there.