HP SIM 6.3 - mxdomainmgr.exe high memory usage

[rib11]

HP SIM and RSP is installed on a DL360G6 with 8GB RAM and Windows 2008R2.

The problem is, that hpsim consumes too much memory.

After restart of mxdomainmgr.exe service it grows immediately.

How to resolve this issue?

regards 

[Suman_1978 · Accepted solution]

Hi,

You may try the following work around:

1.  On the Microsoft Windows CMS, in SNMP Service Properties, under the Security tab, deselect the Send Authentication trap checkbox.

2.  Restart the SNMP and SIM services.

Refer to the attached image.

Thank You!
__________________________________________
Was the post useful? Click on the white KUDOS! Star.

For product specific Guided Troubleshooting visit; http://www.hp.com/support/hpgt
Want to know How to use HP Guided Troubleshooting?  Visit the below link.
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c03283214

[Jan Soska]

very good post.

Jan

[clinton_me]

Hello,

Has this completely solved the issue? The memory did not go high anymore?

Thank you,

[TeerapongJ]

if i do follow your reccommed, i would like to know impact when i deselect in send authentication trap.