HP SIM Issue

[Avinash20]

Have HP SIM installed on HP-UX 11.11 server
CMS clients are HP-UX 11.11 and 11.23

************ cimprovider output of HPSIM server******************

# cimprovider -ls
MODULE STATUS
OperatingSystemModule OK
ComputerSystemModule OK
ProcessModule OK
IPProviderModule OK
HP_NParProviderModule OK
HP_VParProviderModule OK
HP_iCODProviderModule OK
HPUXLVMProviderModule OK

********************************************************************


************ cimprovider output of Managed system ( 11.23)******************

# cimprovider -ls
MODULE STATUS
OperatingSystemModule OK
ComputerSystemModule OK
ProcessModule OK
IPProviderModule OK
DNSProviderModule OK
NTPProviderModule OK
NISProviderModule OK
SDProviderModule OK
HP_NParProviderModule OK
HP_ResParProviderModule OK
HPUXSCSIProviderModule OK
HPUXFCProviderModule OK
HPUXLANProviderModule OK
HPUXLVMProviderModule OK
HP_VParProviderModule OK
HP_UtilizationProviderModule OK
HPVMProviderModule OK
HPUX_ControlProviderModule OK
ErrorMetadataProviderModule OK
EMArchiveConsumerModule OK
EMEmailConsumerModule OK
ThrottlingConfigProviderModule OK
WBEMToEMSConsumerModule OK
SFMProviderModule OK
FMDModule OK
HPHealthStateProviderModule OK
HP_iCODProviderModule OK
HP_iCAPProviderModule OK
HP_GiCAPProviderModule OK
IOTreeModule OK

*******************************************************************************

NOTE:- EMSWrapperProviderModule should be present.

*******************************************************************************


After giving command for event subscriptions for the managed node From CMS server, getting following error:-

# mxwbemsub -a -n test6

Create Subscriptions for:
test6
FAILED to create indication subscription.
No valid path to talk to CIMOM for test6. Make sure that you have entered the correct WBEM credentials in the protocol settings page and that this system has been discovered with the WBEM protocol.

Through GUI also getting the same error.=

Attached is the error for the GUI

[Avinash20]

Closing the thread