HP Sim

[Pablo Jaramillo]

como puedo hacer para que el discovery me encuentre los computadores en la red y me diga que sistema operativo tiene y que hardware tiene ?

[Daniel Leblanc]

hope this you re answer

http://docs.hp.com/en/418812-001/ch04s04.html

[Pablo Jaramillo]

Muchas Gracias por el dato. Mi problema es que cuando hago el discovery el HP SIm me muestra los equipos en la red, sin embargo los datos que aparecen no incluyen la version del sistema operativo ni el hardware que tiene. Hay que hacer algo en especial en los computadores o hacer algo con el HP sim?

[Daniel Leblanc]

Can someone translate what he said please?

[Pablo Jaramillo]

My problem is that when I do discovery the HP SIm shows the equipment to me in the network, nevertheless the data do not include the version of the operating system nor the hardware that it has. It is necessary to do something with the computers or to do something with the HP sim?

[Daniel Leblanc · Accepted solution]

Oh yes ,a MUST

1 All you re server SNMP setting are set for TRAPS>Communite name(correc name),TRAPS>Communite name>traps destination> 1-server Insight & 2-127.0.0.1
#2 All you re server snmp setting are set for SECURITE> Accepted community name>Communite name(correc name),All you re server snmp setting are set for SECURITE> Accepted community name>Communite name> Accepted packet from these host>1-server Insight & 2-127.0.0.1.

3# in youre Home page manegement>Setting>Securite
A_IP Binding-Nothing
B_IP Restricted Login-Nothing
C_Local Server Certificate-Nothing
D_Local/Anonymous Access-Nothing
E_Trust Mode>Secure Trust Modes:Trust by Certificate
F_Trusted Management Servers>Importe you Insight server certificate
G_User Groups-Nothing

[Pablo Jaramillo]

HI DANIEL, Even not like doing the previous thing that you said to me.

[Pablo Jaramillo]

I already made the procedure that you said to me but even the HP Sim finds neither the hardware nor the operating system of the equipment. I must do something with the MIB in the HP sim?

These MIB of this site can serve to me as something?

http://www.oidview.com/mibs/674/md-674-1.html

[Marc_60]

Firewall? are all necessary ports open?

just my 2cents

[Pablo Jaramillo]

the equipment is win 2k server and it does not have the activated the firewall.

[Daniel Leblanc]

Do you the most recent HP Management Agent installed? on the server you try to get the hardware?

In the Homepage management do you see any section like NIC,Operating System,Storage,System Config in Green?

[Pablo Jaramillo]

hello, thanks for the answer. As I can verify if I have the installed recent agent but ?

[Daniel Leblanc]

???? i dont understand you re last comment.

[Pablo Jaramillo]

how if I have but the recent installed agent?

I cannot see the section of the NIC, Operating System,Storage,System Config.

[Daniel Leblanc]

Do you have the section Version Control,this section will tel you what you have,if not..http://h18000.www1.hp.com/support/files/server/us/download/24475.html

[Pablo Jaramillo]

thanks, but the file is not installed in my computer. i send the screen the result obtain.

[Daniel Leblanc]

Then just try to install it, it will tell you what version you have before the install,then you could install it for the Agent.
It seems not to be able to read you HP Agent,when you will install it and if it tell you that there is no Agent install ,then you go for it Install

[Pablo Jaramillo]

Thank... the file that you say it to me I must install in workstation?

[Pablo Jaramillo]

what agent is necessary to install in equipment HP and dell so that the HP sim shows the hardware and installed software?

[Daniel Leblanc]

HEre is the HP Agent
http://h18023.www1.hp.com/support/files/server/us/download/24238.html

[Daniel Leblanc]

You should read this for the Dell server:
http://www.dell.com/downloads/global/solutions/Integrating_PowerEdge_Servers_into_HPSIM50.pdf

[Pablo Jaramillo]

if the workstation with win 9X or Notebook PC (Ej dv4001 or dell inspiron 5100), that agent must have installed for that hp sim find hardware and software?

[Daniel Leblanc]

For Proliant server only!

For Win9x on as portable is a different agent
http://h18007.www1.hp.com/support/files/hpcpqnk/us/download/21565.html

[Pablo Jaramillo]

Thanks for the Agent !!! Installing it if I can see the hardware and software.

I have the following question: the systems with win xp, the firewall lets see neither hardware nor software. If I deactivate the firewall, of that form if I can. I agrege the ports using the attached procedure but do not work. He can indicate to me that he forms I must do it?

[Daniel Leblanc]

I know that you use port 2381,161,162,80 and 8080,that all i think you need to let passe with you re firewall.