Insight Agents

[Shorty_2]

What are the minimum required Insight Agent files that need to be installed on a server? We have ~1,000 HP servers and need to get them reporting back to SIM. We are exploring our options as not to install the entire PSP due to the potential impact on the environment since they've been largely negelected in this area.

[Daniel Leblanc]

It depends on what trouble you want,all the agent have there on little trouble or added more support for some kind of hardware piece.

I would alway keep mine up to date, and i have over 775 servers in this province imagine all the other and use a way to deploy these with tactical planning.

Look below and you will understand: i do reminber one of these version shoot my server CPU at 100%(7.41)

File cp006281.exe
Name HP Insight Management Agents for Windows 2000/Windows Server 2003 Version 7.60.0.0
Version 7.60.0.0
Languages English (US), Japanese
Release Date 2006-08-14
Description HP Insight Management Agents help IT administrators rapidly respond to potential and actual system failures, increase system stability, reduce troubleshooting complexity, and minimize downtime by providing predictive fault management.
Date Last Configured (never configured)
Prerequisite Notes SNMP Service.

Installation Notes Download the Smart Component to a directory on your hard drive and change to that directory. The downloaded file is a self-extracting executable with a filename based on the Smart Component Number. From that drive and directory, execute the downloaded file. Click the "Install" button to proceed with the installation. The agents will automatically be installed.

Revision History Version 7.60.0.0 (Contains Bug Fixes)
Enhancements
Added support for the following:
NC326m, NC325m, NC360T, and NC373T
cpqNicIfPhysAdapterSpeedMbps MIB item
Added SAS HBA tape support
Optimized the algorithm to collect physical adapter information.
Removed part-number for NC7170.

Updated to report correct poll interval in cpqNicOsCommonPollFreq.

NIC agent initialization error handling improved and number of retries increased.

IP address of an interface will be displayed in SMH only if it is valid address.

Fixes
The label "Redundancy Control" was updated to "Switchover Mode."
Version 7.51.0.0 (Contains Bug Fixes)
Enhancements
Added support for the NC326m, NC325m, and NC360T.
Optimized the algorithm to collect physical adapter information.

Removed part-number for NC7170.

Added support for cpqNicIfPhysAdapterSpeedMbps MIB item.

Updated to report correct poll interval in cpqNicOsCommonPollFreq.

Improved initialization error handling and increased number of retries.

Updated to show IP address of an interface in SMH only if it is valid address.

Fixes
The label "Redundancy Control" changed to "Switchover Mode."
NIC agent fails if multifunction adapters are persent in the system and the system is under heavy load.

NIC agent leaks small amount of memory in every poll cycle when multifunction adapters are present.

Version 7.50.0.0 (Contains Bug Fixes)
Enhancements
This agent now supports the NC380T, NC373i, NC373m, NC371i, NC373F NICs and LOMs.
Added support for the the following:

HP 8 INT Port SAS/SATA HBA and HP 4 INT Port SAS/SATA HBA. Smart Array P400 Controller Smart Array P400i Controller Smart Array E200 Controller Smart Array E200i Controller
Component installer was enhanced to leave the component XML file (cpxxxxxx.xml) in a known location (%SystemDrive%\CPQSYSTEM\) so the HP Management and Version Control agents can retrieve information about the installed components on the server.
Fixes
Improved the detection of S.M.A.R.T predictive failures on drives attached to HP SAS/SATA HBAs.
Resolved an issue where some storage boxes may not be displayed if boxes are attached to both Smart Array controllers and SCSI HBAs.

Version 7.41.0.0 (Contains Bug Fixes)
Enhancements
Added support for the following:
Integrated Lights-Out 2 support
Dual Core Support
HP 8 INT Port SAS/SATA HBA and HP 4 INT Port SAS/SATA HBA
Fixes
Improved the detection of S.M.A.R.T predictive failures on drives attached to HP SAS/SATA HBAs.
Resolved the following issues:

Where some storage boxes may not be displayed if boxes are attached to both Smart Array controllers and SCSI HBAs.
Insight Management Agents service would sometimes cause high CPU utilization.
Insight Server Agents for Windows reporting false CPU failure.
Clearing all thresholds from HP Management Agent would not clear thresholds under the Performance tab in the System Management Homepage.
Threshold alerts would not get resent when the total disk usage falls below the threshold value and then crosses it again.
Version 7.40.1.0 (Enhancements)
Enhancements
Added support for the following:
Integrated Lights-Out 2 support
Dual Core Support
Version 7.40.0.0 (Contains Bug Fixes)
Enhancements
Added support for the following:
NC324i, NC325i, NC326i, NC380T.
HP 8 INT Port SAS/SATA HBA.
MSA1500 Active/Active firmware.
Made the 'team member role' to match NCU's text.
Added status 'redundancy lost' and 'redundancy reduced' to teams.

Fixes
Resolved the following:
Isssue with the storage box and physical drive SNMP traps. The agent was not provided sufficient location information for drives and storage boxes attached to a Smart Array P600.
Issue with the drive hot plug icon on the Smart Array P600. The agent was incorrectly determining this value.
Version 7.30.0.0 (Contains Bug Fixes)
Enhancements
Added support for NC370F and NC370T.
Fixes
Resolved issue where traps have OID of the 'ipAdEntAddr' field wrong.
Version 7.20.0.0 (Contains Bug Fixes)
Enhancements
Added support for the following:
New HP System Mangement Home Page.
NC320T, NC310F and NC150T adapters.
Advanced teaming features.
Windows Server 2003 x64 Editions.
Virus Throttle feature.
Fixes
Resolved the following:
Dead Links for Agents are shown in System Insight Manager links page.
Script error is shown when SNMP service is not configured.
NIC agent does not display any NIC info on a new installation.
SNMP service dies after rebooting the system w/multiple NIC. NIC Agent WMI error is logged on Event Viewer when virus throttle is not installed on Windows 2003.
Issue with Systems Management Homepage not reporting SA6400 Array Controller information under French version of Windows 2000 with SP4.
Issue with the Fibre agent leaking memory when an MSA1000 or MSA1500 is attached.
SMH does not display any agents on Japanese Windows 2003/2000 with Japanese Internet explorer.
Version 7.10.0.0 (Contains Bug Fixes)
Enhancements
Added support for the following:
HP StorageWorks Modular Smart Array 500 G2 storage system and controller.
HP StorageWorks Modular Smart Array 1500 storage system.
HP StorageWorks Modular Smart Array 20 storage system was added.
NC7782 and NC1020
Added SNMP MIB Item to show configured speed and duplex for NIC.
Fixes
Resolved the following issues where:
NIC Agent shuts down when virtual adapters are installed on Windows.
Value reported for cpqNicIfPhysAdapterSpeed is incorrect.
Speed field shows different value depending on operating system when Interface Status is 'Failed.'
Version 7.0.0.0 (Contains Bug Fixes)
Enhancements
Added an SNMP trap condition to the trap flags included in all SNMP traps. Added support for the following:
NC7771 and NC7761.
Tape autoloaders attached to SCSI controllers was enhanced. The model, firmware revision and serial number of both the tape drive and the media changer are now displayed.
Fixes
Resolved issue where NIC Agent shuts down with VMWare GSX installed on Windows 2000. Agent Help requires an update to reflect new Interface Status values. Updated System Management HTTP Server, version 5.91.0. This includes the OpenSSL 0.9.6k release which fixes some security vulnerabilities. Modified the Email Event Notifier to correct where some storage events were not being emailed to the recipient.
Version 6.40.0.0 (Contains Bug Fixes)
Enhancements
Updated categorization information to ensure proper placement on the support and drivers website (hp.com), Remote Deployment Utility, and Version Control Repository Manager. Support was added for the Smart Array 6400 EM controller. The Ultra320 SCSI controller with 133 MHz 64-bit PCI-X system interface supports up to 56 drives, with up to 2.2 TB per logical volume. Added HP Insight to the Names of all the Services.
Fixes
Resolved the following:
Corrected IML Event Log repair. Prevents NIC Agent from repairing incorrect entry.
Issue where NIC Agents caused Event ID 296 with MS Loopback adapter.
Issue where labeling both NIC ports from a DL360 G3 as "Port 1" via Web agents.
Modified the installer to disallow 32-bit drivers/applications from installing on 64-bit operating systems. The Foundation Agent was updated to properly retrieve storage performance statistics on Windows Server 2003. A number of counters were reporting 0 values causing incorrect data to be displayed in the ProLiant Essentials Performance Management Pack (PMP). Resolved the following:
Security vulnerability which had the potential to allow Denial of Service (DoS) attacks through maliciously malformed HTTP requests. These maliciously malformed HTTP requests will stop the management products, and for NetWare, abend the OS. A fix to prevent cross-site scripting was checked in to remedy this. Please note that for other Operating Systems (Windows, Linux, etc.) the Operating System will not be affected, and the main functionality of the targeted servers cannot be affected; only the HP Management Products can be halted.
Security vulnerability which had the potential to allow Denial of Service (DoS) attacks through maliciously formatted HTTP Header information. These maliciously malformed HTTP requests will stop the management products, and for NetWare, abend the OS. Please note that for other Operating Systems (Windows, Linux, etc.) the Operating System will not be affected, and the main functionality of the targeted servers cannot be affected; only the HP Management Products can be halted.
Security vulnerability that had the potential to allow timing attacks to be performed on RSA keys, a vulnerability to which OpenSSL is generally vulnerable. The correction involves turning RSA blinding on. OpenSSL version 0.9.6j addresses this vulnerability and was incorporated to remedy this.
Security vulnerability to which OpenSSL is generally vulnerable. This vulnerability has the potential to allow a timing attack on OpenSSL that in effect allows an attacker, through creating millions of invalid SSL/TSL connections, to perform a single RSA private key operation on a ciphertext of its choice using the server's RSA key, without actually compromising the server's RSA key. OpenSSL version 0.9.6j addresses this vulnerability and was incorporated to remedy this.
Version 6.31.0.0B (Contains Bug Fixes)
Fixes
The Foundation Agent was updated to properly retrieve storage performance statistics on Windows Server 2003. A number of counters were reporting 0 values causing incorrect data to be displayed in the the ProLiant Essentials Performance Management Pack (PMP).
Version 6.30.0.0 (Enhancements)
Enhancements
Added for the Smart Array 6400 controller. The Ultra320 SCSI controller with 133 MHz 64-bit PCI-X system interface supports up to 28 drives, with up to 2.2 TB per logical volume. Updated the following:
Single Agent Installer
Japanese Integration
Foundation Agents for Windows version 6.20.0.0 (12 Feb 03) Updated Windows OS Management support. version 6.10.1.0 (7 Feb 03) Updated Windows OS Management support. version 6.10.0.0 (4 Dec 02) Updated Windows Operating System Management support. version 6.0.0.0 (15 Oct 02) Added firmware revision table info (for Host Agent) to CPQSM2.DLL. Updated support for Windows Operating System Management. version 5.50.0.0 (27 Aug 02) Updated:
Compaq OS Information Sub Agent
Windows OS Management support
Added support for:
User definable server role strings.
SSL security support in the Web Management Agent.
SNMP Configuration via the Web Management Agent.
Updated to correct the following:
A potential security vulnerability in Compaq Web Agent Cpqwmgmt.exe prior to 5.00.
The Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive, or some other removable media.
Compaq Web Agent Cpqwmgmt.exe will keep using more system memory if users keep browsing to it. This can cause the server to run a low system memory eventually.
version 5.40.0.0 (5 Jun 02) Added support for the following:
User definable server role strings
SSL security support in the Web Management Agent
SNMP Configuration via the Web Management Agent
version 5.30.0.0 (17 Jan 02) Added support for the following:
Updated Power Supply Traps
The Firmware Version Table
Modified the Compaq Insight Manager (CIM) client to properly display agent information. Resolved isssue to allow software version table to show the current drivers. version 5.10.1.0 (7 Sep 01) Modified the software version table to properly display the drivers. version 5.10.0.0 (27 Jun 01) Enhanced the installer to work with future deployment utilities. Updated functionality of NIC information options in the control panel. version 5.00.0.0 (12 Apr 01) Added support for the Unit Identification LED. Modified system memory usage of the Compaq Web Agent CPQWMGMT.EXE to prevent eventual low system memory when running Windows NT and Windows 2000. Updated the following:
CPQLOGIN.JAR to notify the user that an invalid name was entered, preventing a crash of the HMMO when changing an account password (when logged in with administrator rights) with an invalid user name.
Compaq Web Agent Cpqwmgmt.exe to resolve a potential security vulnerability.
version 4.90 (11 Oct 00) Added support for the following:
Common Cluster Agent
Compaq OS Managment under Windows 2000
Modified to allow the user to format or partition a drive on an array control, on an optical drive, or some other removable media. Updated CPQLOGIN.JAR to notify the user that an invalid name was entered, preventing a crash of the HMMO when changing an account password (when logged in with administrator rights) with an invalid user name. version 4.80 B (24 Jul 00) Added support for the following:
Common Cluster Agent
Compaq OS Managment under Windows 2000
Updated CPQLOGIN.JAR to notify the user that an invalid name was entered, preventing a crash of the HMMO when changing an account password (when logged in with administrator rights) with an invalid user name. Resolved issue with previous versions of the Compaq Foundation Agents not allowing the formatting or partitioning of a drive on an array control. In previous versions, this issue may also occur on an optical drive or other removable media. version 4.80 (21 Jun 00) Resolved issue where the Foundation Agents running would not allow the customer to format or partition a drive on an array control. This would also occur on an optical drive or some other removable media. The information is now gathered through a different method that allows those tasks to occur. Server Agents for Windows version 6.20.0.0 (12 Feb 03) Added support for the following servers:
ProLiant BL40p
ProLiant BL20p G2
ProLiant DL760 G2
ProLiant DL740
ProLiant DL560
ProLiant DL360 G3
ProLiant DL320 G2
version 6.10.0.0 (4 Dec 02)
ProLiant DL360 G3
ProLiant DL320 G2
version 6.0.0.0 (15 Oct 02) Added support for new ProLiant server models. Modified to prevent Windows from failing upon startup under certain rare circomstances. version 5.50.0.0 (27 Aug 02) Added support for new Compaq ProLiant Server models. Updated to prevent the failing of the Compaq Server Agents v4.90 - Windows upon startup under certain rare circumstances. version 5.40.1.0 (16 Jul 02) Updated to correctly populate the event log with RILOE II debug informational message. version 5.40.0.0 (5 Jun 02) Added support for various Compaq servers. Modified to prevent fail upon startup under certain rare circumstances version 5.30.0.0 (17 Jan 02) Added support for the following:
New Compaq servers
Processor speeds up to 1.26 GHz
The Integrated Management Log (IML) status has been refined to better reflect the overall status of the server. The events that can now change the overall status of a server, as seen in Compaq Insight Manager and Compaq Web Based Management, are as follows:
Memory errors
Accelerator errors
CPU errors
Host bus errors
EISA bus errors
PCI bus errors
Expansion slot events
Power subsystem events
Automatic server recovery events
Operating system events
Unrecoverable system errors
The changes were made to eliminate redundancies in status reporting. Updated to prevent a possible startup problem which caused Compaq Server Agents v4.90 for Windows to fail upon under certain rare circumstances. version 5.20.0.0 (26 Sep 01) Added support for the following:
Updated Power Supply Traps
The Firmware Version Table
New Compaq ProLiant servers.
version 5.10.0.0 (27 Jun 01) Added support for the following:
New Compaq ProLiant servers
The Unit Identification LED
Enhanced the installer to work with future deployment utilities. Modified to prevent rare failures upon startup. version 5.00.0.0 (12 Apr 01) Added support for the following:
New Compaq ProLiant servers
The Unit Identification LED
Modified to prevent failure upon startup under certain rare circomstances. version 4.90 B (8 Nov 00) Added support for the following:
Universal Serial Bus (USB)
GigaHertz processor speeds
New Compaq ProLiant servers
On rare occasions, the Compaq SmartStartTM 4.90 Compaq Insight Management Agents may fail to load in Microsoft Windows 2000 or Microsoft Windows NT 4.0. This issue may occur during the SmartStart 4.90 installation of the Compaq Support Paq or anytime the Compaq Insight Management Agents are restarted. A pop-up window reports this issue by displaying the following:
"At least one service or driver failed during system startup - check Event Viewer"
The Microsoft Windows NT 4.0 or Microsoft Windows 2000 Event Log also reports the issue:
"Server Agents service hung on startup."
Without the Compaq Insight Management Agents, the Compaq Insight Manager console will report the server as "inaccessible", the Compaq Insight Manager XE device status is "unknown", and the Compaq Web Agent interface cannot be accessed from a browser. This issue promotes another symptom. When using Compaq SmartStart for Servers to configure Microsoft Windows 2000 server software, the SmartStart Assisted Path Installation process can take up to 30 minutes to complete, during which time the following message displays:
"Installing and configuring Compaq programs. Please wait."
Do not interrupt the installation process. The Microsoft Windows 2000 installation is successful after the 30-minute waiting period, but the Compaq Insight Management Agents must be updated. The resolution for this issue is available at http:/www.compaq.com/support/files/server/us/download/9197.html. version 4.90 (11 Oct 00) Added support for the following:
Universal Serial Bus
GigaHertz processor speeds
The ProLiant ML350
The ProLiant DL320
Resolved the following:
Compaq Server Agents version 4.80 or earlier was resending old SNMP traps.
Issue with the Compaq Server Agents version 4.80 or earlier, were an invalid device status for Hot Plug PCI devices would show under Windows 2000.
version 4.80 (21 Jun 00) Added support for 800, 866, and 933 MHz processor speeds. Resolved the following:
In which Compaq Server Agents for Windows Version 4.70 (or earlier) would not repair Critical Error Log or Corrected Memory Log errors that occurred during the year 2000.
In which Compaq Server Agents for Windows Version 4.70 (or earlier) would not send an ASR Recovery Complete trap on ProLiant ML330 servers.
NIC Agents for Windows version 6.20.0.0 (12 Feb 03) Updated to resolve the following:
Issues with Siebel Resonate Software.
SNMP memory leak.
Teaming issue.
version 6.10.1.0 (15 Jan 03) Updated to resolve interoperability problems with Resonate 3.2.2e. version 6.10.0.0 (4 Dec 02) Updated for rebranding. version 6.0.0.0 (15 Oct 02) Added full support for VLANs. version 5.50.1.0 (29 Aug 02) Updated to allow teams to show up on the web interface. version 5.50.0.0 (27 Aug 02) Added support for additional Compaq adapters:
Improved Token Ring
VLAN configuration
New Redundancy Reduced event
Modified to properly report:
Switch Assisted Load Balancing Team Members as Team Member. They were previously reported as Primary and Secondary on Windows 2000.
Correct failure status in traps on Windows 2000.
Physical and logical adapter speeds dynamically on Windows NT4.
Web interface now reports Teamed Adapters consistently in the Web Interface on Windows 2000.
Resolved the following:
An Agent crash when stopped immediately after starting on Windows 2000.
A potential crash in Windows Server 2003 Build 3644 and later.
version 5.40.0.0 (5 Jun 02) Added error correction for Integrated Management Log and Display in Windows 2000. Enhanced Web View to:
Display speed from NIC MIB.
Include Token Ring Advanced Statistics.
Updated the following:
Windows NT 4.0 to dynamically report logical and physical adapter speeds.
The Advanced Team Statistics to be functional.
To correctly display the Loopback speed in Web View.
Corrected the following:
The IP address in Traps.
Trap data in Windows 2000.
Occasional agent crashes when dynamically creating or dissolving teams in Windows 2000 and Windows Server 2003.
Removed erroneous event log error message for Windows Server 2003.
version 5.30.0.0 (17 Jan 02) Enhanced trap support for Microsoft Windows 2000. Added support for new Compaq NICs. Changed adapter speed to be updated dynamically. version 5.20.0.0 (26 Sep 01) Updated the following:
Correctly assigned embedded NIC port numbers.
Reduced the size of footprint and initialization time.
To correct an invalid TLAN trap.
The Token Ring Statistics driver.
To disable the logging of an IML failure to the event log. Some systems do not support IML.
Resolved a synchronization problem between the Agent and Simple Network Management Protocol (SNMP). version 5.10.0.0 (27 Jun 01) Added support for the following hardware:
NC7131 10/100/1000 Network Adapter
NC6134 Gigabit Network Adapter
Added redundancy increased and redundancy decreased traps. Enhanced the installer to work with future deployment utilities. version 5.00.0.0 (12 Apr 01) Added support for Dual Embedded Adapters. version 4.90 (11 Oct 00) Added support for the Network Fault Tolerence Teaming for the TLAN-based NICs on Windows NT 4.0. version 4.80 (21 Jun 00) Added trap numbers to trap messages. Storage Agents for Windows version 6.20.0.0 (12 Feb 03) Added support for the following:
HP Smart Array 641 Controller. The HP Smart Array 641 Controller is a low-cost, single internal channel, U320 SCSI Smart Array controller with a 64-bit PCI-X, 133MHz system interface supporting up to 14 hard drives.
HP Smart Array 642 Controller. The HP Smart Array 642 Controller is a low-cost dual channel, one internal and one external, U320 SCSI Smart Array controller with a 64-bit PCI-X, 133MHz system interface supporting up to 14 hard drives per channel.
HP 64-Bit/133MHz PCI-X 2CH Ultra320 HBA. The HP 64-Bit/133MHz PCI-X 2CH Ultra320 HBA is a 64-bit PCI-X, 133 Mhz, non-intelligent Dual Channel Ultra-320 Host Adapter that is backwards compatible to Ultra3, Ultra2, and Ultra Wide SCSI devices. It is also backwards compatible to both 32-bit PCI and 33Mhz expansion slots.
version 6.10.0.0 (4 Dec 02) Modified Fibre Channel support for Microsoft Windows Server 2003 to properly discover devices and storage systems attached to a Fibre Channel HBA. version 6.0.0.0 (15 Oct 02) Expanded support for the Smart Array Cluster Storage enclosure to include four server nodes. version 5.50.0.0 (27 Aug 02) Added support for the following:
Compaq StorageWorks 64bit/33Mhz PCI to Fibre Channel Host Bus Adapter.
HP Surestore Ultrium 230 tape drive.
Updated to allow the following:
Spare replace drive field to handle multiple physical drives from different arrays.
Prevent the Fibre Tape and Storage Boxes from disappearing when the Fibre cable is unplugged.
version 5.40.0.0 (5 Jun 02) Added the following:
Support for drives not configured as part of a logical drive or spare drive in an internal array.
Support for the Compaq Smart Array 5312 controller. This drive array controller has a 64-bit, 133 MHz PCI-X system interface and provides two Ultra3 (160M, LVDS) SCSI channels supporting up to 15 drives per channel.
Identify Drives capability for all physical drives connected to a Drive Array or Fibre Channel controller. The LEDs on all physical drives that are connected to a Drive Array or Fibre Channel controller can be blinked for a specified length of time to locate the drives.
Modified to:
Report the Compaq Recovery Server Option status when multiple servers are configured with the Compaq Smart Array Cluster Storage system.
Properly indicate whether the door on a Compaq TL895 Tape Storage System is open and the tape storage system is operational. This would only occur when the tape storage system was connected to the server using a Compaq StorageWorks Library Adapter.
Updated to not limit an external array logical drive to 32 spare drives or 32 physical drives. version 5.30.0.0 (17 Jan 02) Added support for the following:
Compaq StorageWorks Modular SAN Array 1000. This SAN storage system supports dual hot-pluggable active/standby redundant controllers with Advanced Data Guarding and four SCSI buses on each controller. It supports up to 42 one-inch Ultra3 SCSI hard drives (14 internal and 28 external using 2 StorageWorks 4300 Enclosures).
Compaq Smart Array Cluster Storage system. This SCSI storage system supports dual hot-pluggable active/standby redundant controllers with Advanced Data Guarding and four SCSI buses on each controller. It supports up to 14 one-inch Ultra3 SCSI hard drives.
Compaq FCA-2101 fibre host bus adapter.
version 5.20.0.0 (26 Sep 01) Added support for Integrated Drive Electronics (IDE) ATA Software RAID. Modified to properly load all of the Compaq Insight Manager agents version 5.10.1.0 (20 Aug 01) Added support for the following:
Compaq Smart Array 5i controller. It is a 32-bit PCI controller that supports Ultra3 SCSI and RAID technologies.
Compaq Smart Array 532 Controller. It is a low-cost 64-bit/66MHz PCI single-channel LVD SCSI Ultra3 drive array controller. The single channel supports up to 15 drives externally or internally.
Compaq Smart Array, SAN Access Module. It is an Fibre Channel daughter board for the Compaq Smart Array 5300 Controller.
The Storage Agents were incorrectly reading data from the StorageWorks RAID Array Storage System agents (STEAM). In some cases, the data overflowed the allocated memory and caused the storage agents to fail. Since the Foundation and WEB agents are dependent on the storage agents, they also failed to start. version 5.10.0.0 (27 Jun 01) Added support for the following:
Compaq Smart Array, SAN Access Module, a Fibre Channel daughter board for the Compaq Smart Array 5300 Controller.
Compaq Smart Array 5i Controller, a 32-bit PCI controller that supports Ultra3 SCSI and RAID technologies.
Compaq Smart Array 532 Controller, a low-cost 64-bit/66MHz PCI single-channel LVD SCSI Ultra3 drive array controller. The single channel supports up to 15 drives externally or internally.
Enhanced the installer to work with future deployment utilities. version 5.00.0.0 (12 Apr 01) Added support for the following:
Compaq ESL9198 DLX tape library with 0 to 8 - 40/80GB DLT8000 tape drives with a LVD SCSI-2 interface. It provides a maximum storage capacity of up to 7.9 Terabytes or 15.8 Terabytes compressed.
Identify Drive capability where the LEDs on physical drives attached to a Drive Array or Fibre Channel controller can be blinked for a specified length of time.
Multiple IDE controllers. New IDE controller, ATA disk and ATAPI device tables have been added to the IDE MIB.
Compaq AIT 35 Low Voltage Differential SCSI tape drive.
Compaq MSL5026DLX tape library which contains two hot plug DLT8000 (40/80GB) tape drives and two tape magazines with a total of 26 slots.
Resolved issue with the SCSI Agent interfering with ArcServ BackupExec Software on Microsoft Windows 2000. SCSI port errors and timeouts were being reported in the Windows Event Log and the BackupExec status log. The Drive Array and Fibre Channel Array Predictive Indicators: Functional Test 1, 2 and 3, Used Realloc and Spinup Time are being replaced with Predictive Failure S.M.A.R.T. Status on all new Compaq hard drives. version 4.90 (11 Oct 00) Added support for the following:
Compaq StorageWorks Fibre Channel Modular Data Router
Compaq StorageWorks TL891 DLX Mini-Library
Compaq 40/80 GB DLT tape drive
Microsoft Windows 2000 Service Pack 1.
Resolved the following issues:
To no longer report Advanced Data Guarding as "Fully Functional" even if the firmware on the Compaq Smart Array 5300 Controller disabled it.
With IDE disk drives on Microsoft Windows 2000 where the drive condition was always "other", the drive details were incomplete, and the predictive failure was disabled. All IDE disk drive information is now reported correctly.
To correctly list the Drive Array Information Agent as Inactive instead of Active on a Compaq Server configured with a Compaq Smart Array 5300 Controller running Microsoft Windows NT Server 4.0.
version 4.80 B (24 Jul 00) Resolved the following:
Issue involving the Drive Array Agent not being set to Active during a new install or upgrade of the Compaq Storage Agents on Windows NT 4.0 when the only drive array controller in the system was a Compaq Smart Array 5300 Controller.
Issue in which the Compaq Storage Agents for Windows Version 4.70 incorrectly reports the current status of StorageWorks RAID Array 4000 and 4100 storage enclosures after they are hot removed and subsequently re-added to the loop.
version 4.80 (21 Jun 00) Added support for the following:
Compaq RAID LC2 Controller with one LVDS SCSI channel configured as RAID.
Compaq Tape Array 1000 which contains ten hot plug AIT 50 tape drives.
Compaq SSL2020TL Tape Library which contains two AIT 50 tape drives.
Compaq Smart Array 5300 Controller with two or four Wide Ultra3 SCSI channels.
Resolved issue in which the Compaq Storage Agents for Windows Version 4.70 would abnormally shut down when a Smart Array 4200 Controller was installed in a higher numbered slot than another Smart Array 3200 Controller installed in a lower numbered slot.