Installing HP SIm 4.1

[Paul Smith_17]

Have downloaded HPSim 4.1 to install on a fresh install off 2000 Advanced server with SP3 installed.
On double clicking the downloaded application, the initial script runs and performs the menu option. I slect option 4 to install 4.1N with Sp1 . Pre_installation step is DONE and the Installation status is "Not Run" . I am only given the option to FINISH.
After readin the install document despite what the download manager says, it talks about SP4 being needed. So I have installed Sp4 on the server and re-started the install.
Same results.
How do I install the software ..
Thanks.

[Joel Rubenstein]

What version of IE is installed on the server. That error typically occurs with older versions of IE.

[Edgars Rudans]

I have same problem on windows2000 std sp4. IE istalled by default as 5.0. Will check installing new IE.

TIA

[Aravindh Rajaram]

Don't worry about the "Not Run" status. This will be updated to "Done" only if Insight Manager 7 was found prior to HPSIM 4.1 installation and DMT for IM7 was run during the pre-installation phase.

In your case you are doing a fresh installation and it is obviously right to get the status as "Not Run".

[Edgars Rudans]

I've installed IE6 sp1. Now installation process runs fine! Thank you very much.

[Paul Smith_17]

Upgraded IE to 5 and all works fine. Thanks again.