HPE Community
Server Management - Systems Insight Manager
1846415 Members
3258 Online
110256 Solutions
New Discussion

MIB's

 
R S 123
New Member

‎10-29-2006 09:03 PM

‎10-29-2006 09:03 PM

MIB's

I want to pump some SNMP traps into a 3rd party tool for an ML350 and DL360. I have found the MIB's on the CD's, but they don't seem to have any for the power supplies (main or redundant). Nor can I find an MIB for an embedded 5i SCSCI ctrl. Both servers are running MS 2003 - Thanks in advance
0 Kudos
Reply
2 REPLIES 2
fred Passeron
HPE Pro

‎10-30-2006 02:07 AM

‎10-30-2006 02:07 AM

Re: MIB's

Hi

Infos on Power supplies are provided by the following mib : CPQHLTH.MIB. It reports fan, PSU, and temperature failures.
Regarding the 5i ctrl : you will need the CPQIDA.MIB CPQSCSI.MIB and CPQSTSYS.MIB.

Regards

Frederic Passeron
“Life is pleasant. Death is peaceful. It's the transition that's troublesome.” Isaac Asimov
0 Kudos
Reply
R S 123
New Member

‎10-30-2006 09:42 PM

‎10-30-2006 09:42 PM

Re: MIB's

Thanks
I've tried quite a few, but the SNMP comes up with an error each time - not recognised. The MIB doesn't seem to be too generous with names such as 'redundant power supply' to act as a clue, and there are a lot of possibles in there. I know I am using the correct syntax as I can get the RAID to work by using 1.3.6.1.4.1.232.3.1.3.0
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.