Monitoring Netserver with NT4

[Jameson_2]

Can hpSIM monitor Netserver with NT4? If its possible, what would be the requirement?

From the website, I do not see any client version for NT4 so does that mean hpSIM can't monitor Netserver with NT4 operating system?

Please advise. Thanks!

[David Claypool]

Please see the paper "guide to interoperability of hp hardware and hardware
management tools: hp Toptools 5.6 with ProLiant servers and
Insight Manager 7 with hp Netserver systems" at ftp://ftp.compaq.com/pub/supportinformation/papers/tc030304wp_rev0_us.pdf

Everything is still valid when using hpSIM with the exception of the section "compiling new HP MIBs." Those are already included with hpSIM (as well as IM7SP2 and later...).

[Stefan Kreft]

Hi, I'm looking also for the whitepaper described in this article but the link is dead :-( Had anybody this article in archive?
Tanks

[David Claypool]

Here's an archive link: http://whitepapers.zdnet.com/abstract.aspx?promo=50002&docid=42491