HPE Community
Server Management - Systems Insight Manager
1833655 Members
3667 Online
110062 Solutions
New Discussion

Re: Mxdomainmgr.exe memory issue

 
Michael Wiederspiel
Occasional Advisor

‎05-26-2005 02:17 AM

‎05-26-2005 02:17 AM

Mxdomainmgr.exe memory issue

I noticed some comments on the board about this process taking up loads of memory. The only resolution appeared to be a hardware upgrade. Was a bug ever found as to why this service was taking so so much memory for so long? I have an HP DL380 G2 with dual 1.4Ghz processors and 2 GB of memory - this should be sufficient. Any suggestions?
0 Kudos
Reply
1 REPLY 1
Brendan_25
Occasional Advisor

‎06-01-2005 11:53 AM

‎06-01-2005 11:53 AM

Re: Mxdomainmgr.exe memory issue

Minimum requirements fir SIM4.2 SP2

ProLiant servers

1.5GHz Pentium II processor

256MB RAM with VCRM and MSDE on the same server

1GB RAM with VCRM and SQL2000 on the same server

2GB RAM or more recommended




If you are putting the Vulnerability and Patch Management software on then I would recommend a 2GHz processor with 2GB memory.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.