Remove event description

[Morgan geoghegan]

Is there a way to remove the event description that is sent when you configure an event to send an email. For example, when a redundant NIC goes down the following event description is sent.

"This trap will be sent any time a physical adapter in a logical adapter group changes to the Failed condition, but at least one physical adapter remains in the OK condition.. This can be caused by loss of link due to a cable being removed from the adapter or the Hub or Switch. Internal adapter, Hub, or Switch failures can also cause this condition. User Action: Check the cables to the adapter and the Hub or Switch. If no cable problems are found, the adapter, Hub, or Switch may need replacement."

[Haridas]

Yes. You can modify the event description by editing the SNMP trap settings.
In HPSIM, click on Options (menu)-> Events -> SNMP Trap settings.

select the cpqnic.mib. Select the appropriate trap name and customize the description as you need.

You can customize any trap description according to your environment and needs.

Cheers,
Hari