HPE Community
Server Management - Systems Insight Manager
1846763 Members
5247 Online
110256 Solutions
New Discussion

RIBLO Data through SIM

 
Jay Gurbani
Occasional Contributor

‎10-21-2004 04:57 AM

‎10-21-2004 04:57 AM

RIBLO Data through SIM

Does SIM have the capability to gather all the data from RIB's such as Auxiliary Power and KVM are connected ok. I've set the I've set the IM7 integration to high on the RIB, but still the level of data returned on the SIM console is very low.
0 Kudos
Reply
1 REPLY 1
Rob Buxton
Honored Contributor

‎10-21-2004 07:23 AM

‎10-21-2004 07:23 AM

Re: RIBLO Data through SIM

The status of the Auxiliary Power should be displayed by HPSIM. Although on ours it has an Orange Flag and the status is connected internally. So I'm not too sure what that means. Note this is on the Management Processor section of the Server the RIB is installed in.

I don't think the RIB will care if the console or KVM is connected or not. After all its main function is to facilitate remote access.

The RIB can be configured to send SNMP Traps to HPSIM, you could try disconnecting the Auxiliary power and seeing if a Trap is generated. This may also be reflected in HPSIM, it could be either the Shost server or the RIB.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.