Server Management - Systems Insight Manager
1832576 Members
3909 Online
110043 Solutions
New Discussion

RILOE recognition

 
mike bowman_2
Occasional Contributor

RILOE recognition

On the home tab in Insight manager 7, there is no management processor being picked up for some of my servers. However, if I go to the devices tab and look at the management processors, they are listed there. Any idea what might be causing this?
3 REPLIES 3
James Kennedy_4
Trusted Contributor

Re: RILOE recognition

This forum is mainly for SIM, however I beleive the same goes for IM7. You must discover the management processor as a device, just like the server. You should both devices in your listing. Try discovering the IP of your management processors.
Alain Staelen
Advisor

Re: RILOE recognition


I think you also need to put the IP address/servername of the server into the configuration of the RIBLOE.

Under Administration TAB, SNMP/Insight Manager Settings enter the info under insight Manager web agents URL.
Also put the data returned on "High".

It fixed it for a number of my servers. The rest is probably DNS related.


Christian Mentschik
Regular Advisor

Re: RILOE recognition

put the server in the sim. after that, put the rib to the sim. then check the server and start under options > discovery the identify systems... . it helps me in some cases.

best regards chris